Extremely Durable Aluminum Hot Tub and Spa Covers

Hot Tub and Spa Covers Accessories

Spa Cover Cap

Constructed of heavy-duty reinforced woven polyethylene, the rugged Spa Cover Cap is designed to protect your hot tub and spa cover from harsh weather, dirt and debris. The Spa Cover Cap is extremely strong, completely waterproof and designed to work in all climates. Resistant to damage from the suns UV rays, the Spa Cover Cap protects your expensive insulating cover from tree sap, ice, snow, harsh rain and intense sun.. The Spa Cover Cap is also shrink proof, mildew proof, rot resistant and tear resistant. The thread used in it's s construction is the same as in our high quality insulating covers, a 93 pound, UV resistant, bonded, Dacron Polyester thread. The Spa Cover Cap is available in two standard sizes with a 12" elastic hemmed skirt. The elastic hem makes it a breeze to put on and remove The Spa Cover Cap.

- Works in all climates.
- Heavy Duty, Reinforced Woven Polyethylene.
- Built in UV inhibitors reflects sunlight and protect against damaging UV rays.
- Protects Spa and Cover from sun, ice, snow and rain.
- Elastic hem makes for easy removal and installation.
- Available in two standard sizes to fit most spas.

Hurricane Tie-Down Strap

cover tie down Each year, thousands of spa covers are blown off spas and destroyed or damaged by high winds and stormy weather. If the possibility of this problem exists where you live, here's the answer. These 1½" wide black nylon straps are super-strong, and offer an extra level of protection and safety for your hot tub, above and beyond the standard tie-down-straps that come with spa covers.

At 14' long, they are easily retrofitted to any spa cover and even work when used with a cover lifter. The unique locking latches make for complete adjustability, removability and ease of use.

Click on pictures above for a larger view

Tie-down Extender

Click for larger image

If the tie-down straps of your spa cover are too short, or the mounting location on your spa for the buckle is inaccessible or damaged, this could solve your problem. 14" long, 1-1/2" wide nylon straps with the female end of the buckle permanently attached. Simply attach the end of the strap up to 14" away from the original location with the include stainless steel hardware for easy installation.

$18.95 each
Quantity:

Replacement Tie-down Buckles

Click for larger image

This replacement set of spa cover tie-down buckles come complete with four locking buckles, 2 keys and twelve stainless steel screws. Includes comprehensive instructions covering easy replacement even if sewn into the straps.

Floating Blanket Leash

Click for larger image

If you use a cover lifter and a floating blanket this is something you wont know how you ever did without. The Floating Blanket Leash attaches your floating blanket to your spa cover so that when you open your cover, and remove it with the cover lifter, the floating blanket is automatically removed at the same time. No longer will you need to manually remove your floating blanket, and figure out where to put it when you use your spa. Your floating blanket will also remain cleaner since it will be gently hanging, off the ground, over your insulating cover and on top of the cover lifter.

The Cover Saver

Cover lifters work by lifting and supporting the spa cover by it's center hinge. While a cover lifter makes removing the spa cover easier, few insulating covers are truly designed to have their entire weight supported by the hinge. Most spa cover warranties even have an exclusion regarding any damage caused by cover lifters. The Cover Saver removes all the stress from the hinge of the spa cover.

All spa covers eventually begin to absorb water, which increases their weight, and increases the stress on the cover's hinge when supported by a cover lifter. Even a cover specifically designed to accommodate a spa cover lift will eventually be damaged from this excess weight.

The Spa Cover Saver eliminates all stress from the covers hinge by fully supporting the weight of the cover on the lifter !

When the cover and lifter are open, there is no stress on the hinge.

This is because the cover is being supported by the Cover Saver's T-Brackets, not the cover's hinge.

With the spa cover resting on the T-Brackets and not hanging from a bar, the Cover Saver is "saving your cover".

The T-Brackets are attached to your cover and its lift with strong UV-resistant nylon webbing straps.

Click on any picture above for a larger view

303 Aerospace Protectant

Routine use of 303 Protectant keeps vinyl looking like new, reduces UV damage and maintains a like-new color, while dramatically extending its useful life. This beautifying liquid sunscreen is the finest protector there is for all vinyl products.