Aluminum Covers

FREE SHIPPING OF ANY ALUMINUM SPA COVER TO ANYWHERE IN THE CONTIGUOUS UNITED STATES ! ALL COVERS UP TO 96" ARE ONLY $ 995.95 INCLUDING DELIVERY!


In order to assure a proper fitting cover please, carefully measure your spa and fill in the following form. All measurements must be in inches. Please note; these covers are made to YOUR specifications, and we cannot take responsibility for mismeasurements!


 

Step 1. From the picture below choose the shape of your cover.

spa cover

Shape:


Step 2. From the picture above, fill in the direction of the hinge of the cover. For example, if the hinge runs parallel to measurement A, type in "A".

Hinge Direction:


Step 3. Fill in the measurements in inches that correspond to that shape. If a particular measurement is not in your cover's shape, please leave it blank. Covers with measurements of 96" or less are $995.95 including delivery. If over 96", please call for pricing.

A: B: C: D: E:

Please note in the picture above that the cover needs to be slightly smaller than the overall size of the spa for the sealing gasket to have a positive seal on the spa.


Step 4. These covers come standard with slightly rounded corners. If your spa has rounded corners, please fill in the dimension of the radius in inches as pictured, below. If the corners of your cover are square, please leave this blank.

R:


Step 5. The perimeter trim is available in your choice of two colors.


Step 6. From the picture below choose a color for your cover (please note, colors may vary slightly from how they appear on your computer).

Color:


Step 7. Please double and triple check your measurements. If in doubt please don't hesitate to call us. Once again, we cannot be responsible for mismeasured covers. Click the button below, and you're done.

$995.95

Please allow at least 3 weeks for delivery of aluminum covers. Delivery times may occasionally be longer during certain busy times of the year. Aluminum covers are custom made to order and must be paid for before production begins.


Cover Lifter for the Aluminum Spa Cover

This slightly modified version of the Cover Valet is the only spa cover lift designed to work properly with an aluminum spa cover.

This low profile spa cover lift works where others can't, inside a gazebo, up against a wall, even inside a spa room or greenhouse! The high quality, locking pneumatic pistons assist you to make lifting your spa cover a breeze!

$249.95


*The cover is a seperate item and not included with the cover lifter.

Insulating Spa Covers | Aluminum Hot Tub Covers | Roll Covers | Swimspa Covers
Soft Top Tonnaeu Cover | Floating Blankets | Cover Lifters | Spa Cover Accessories
HOME PAGE

phone1.gif (2022 bytes) Contact Us
(800) 735-5290

�1999 - 2009
All Rights Reserved
Abracadabra Hot Tub & Spa Covers
2343 Welcome Ave.
Richmond, CA 94804